Sika 215 Primer 1 Litre
– One Component
– Fast Drying
Areas of Application
Sika® Primer-215 is suitable for application to the following substrates: plastics such as GRP, epoxy resins, PVC, ABS, various non-metallic substrates, FRP, plywood, timber and wooden fixtures. Because plastics vary so much in their chemical composition, preliminary trials are necessary. This product must not be used on plastics that are prone to stress cracking such as acrylics or polycarbonates. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Method of Application
Apply a thin but covering coat of Sika® Primer-215 with a brush or dauber. Do not apply at temperatures below 50°F or above 95°F. For application at lower or higher temperatures, consult with Sika Technical Service. Allow primer to dry for a minimum of 30 minutes at 73°F and 50% relative humidity. Ambient temperature and substrate porosity affect drying time. Surface should be tack-free before Sikaflex® application. For best results, apply Sikaflex® within two hours after priming. Avoid repriming. Sika® Primer-215 should be applied once only. Care must be taken to ensure that this single application gives adequately dense coverage. Reseal container tightly immediately after use.
Please note, after your order has been placed via our e-shop, we will contact you via email with details regarding payment and shipping.
FREE UK mainland delivery on all orders totalling £150 (net) or more. An admin, packaging and delivery charge of £7.20 or £11.50 (depending on size and quantity) will apply to orders less than £150 net. If you are eligible for Volume Purchase or Reseller Discount this will be applied after placing your order and will show on your final invoice.